? 201 3 sensitron semiconductor ? 221 west industry court ? deer park, ny 11729 - 4681 phone (631) 586 7600 fax (631) 242 9798 ? www.sensitron.com ? sales@sensitron.com ? s ensitron ________ s emiconductor technical data data sheet 5378 , re v. c three phase full wave bridge rectifier a ssembly with alsic technology description: 14 00 v, 45 a, 85 0 nsec three phase bridge rectifier assembly max. ratings / electric al characteristics all ratings are at t a = 25 o c unless otherwise specified. rating conditions min typ max unit non - repetitive peak inverse voltage (piv) t j = - 5 5 o c 1400 - - vdc repetitive peak inverse voltage (piv) t j = - 40 o c 1400 - - vdc average dc output current (t c = case temp) (i o ) t c = 55 o c t c = 100 o c t c = 125 o c - - 45 28 16 a average dc output current (t a = ambient temp ) (no heat sink) (i o ) t a = 25 o c t a = 55 o c t a = 100 o c - - 8.0 5.0 2.5 a peak single cycle surge current (i fsm ) t =1.25ms single square wave t c = 25c t c =150c t = 8.3ms 60hz single pulse sine wave t c =25c t c =150c 400 700 570 325 a energy rating i 2 t t =1.25ms single square wave t c = 25c t c =150c 612 405 a 2 s junction temperature case te mperature material temperature t j t op t stg - 55 - 55 - 55 +175 +150 +150 0 c maximum forward voltage (v f ) (300 ? s pulse, duty cycle < 2%) t c = 25 0 c , i f = 9a t c = 25 0 c , i f = 45a t c = 125 0 c , i f = 9a t c = 125 0 c , i f = 45a - - 1.3 0 1.9 0 1.15 1.85 v maximum ins tantan eous reverse current a t rated piv t a = 25 0 c t a = 100 0 c - - 10 1 00 ? a reverse recovery time (t rr ) i f = 0.5a, i r = 1.0a, i rr = 0.25 a , t c = 25 0 c - - 850 nsec junction capacitance (c j ) v r =100v, f= 1mhz - 40 - pf thermal resistance ( ? jl ) per le g - - 4.0 ? c/w sbr1002 a
? 201 3 sensitron semiconductor ? 221 west industry court ? deer park, ny 11729 - 4681 phone (631) 586 7600 fax (631) 242 9798 ? www.sensitron.com ? sales@sensitron.com ? sensitron technical data data sh eet 5378 , rev . c mechanical characteristics: rating conditions min typ max unit isolation voltage all leads - base p late 60hz, 60s - 2000 - v mounting torque 20 0 c - 10 - in - lb. max ac celeration - - - 50 m/s2 weight - - 16 - gms life thermal cycling (qualification test only) - 40 0 c to 125 0 c - 750 - cycles note: add a suffix s to the part number for s - 100 screening. lend bend options: SBR1002A straight leads SBR1002A - 1 lea ds bent down SBR1002A - 2 leads bent up sbr100 2 a
? 201 3 sensitron semiconductor ? 221 west industry court ? deer park, ny 11729 - 4681 phone (631) 586 7600 fax (631) 242 9798 ? www.sensitron.com ? sales@sensitron.com ? sensitron technical data data sheet 5378, rev. c mechanical dimensions: in inches SBR1002A disclaimer: 1 - the information given herein, including the specifications and dimensions , is subject to change without prior notice to improve product characteristics. before ordering, purchasers are advised to contact the sensitron semiconductor sales department for the late st version of the datasheet(s). 2 - in cases where extremely high rel iability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users fai l - safe precautions or other arrangement . 3 - in no event shall sensitron semiconductor be liable for any damages that may result from an accident or any other cause durin g operation of the users units according to the datasheet(s). sensitron semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4 - in no event shall sensitron semiconductor be liable for any failur e in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5 - no license is granted by the datasheet(s) under any patents or other rights of any third party or sensitron semiconductor. 6 - the datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of sensitron semiconductor. 7 - the products (technologies) described in the datasheet(s) are not to be provided to any party whose pu rpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any th ird party. when exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations.
|
